How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct procedure to add the second key. It requires dealer assistance using an electronic handheld computer called Tech-2. Then the transponder must be replaced and a key need to be purchased.
Rotate your keys to stop one from wearing out more than the other. This will help to keep your keys in pristine condition.
Replacement Case
The new key fobs for keys are not like the old Saab keys. saab 9-3 key fob programming G28 Car Keys equipped with electronic devices that make them difficult to copy. This has made stealing cars considerably more difficult than it was a few years ago. It also makes it more expensive to replace keys lost.
Saab 9-3 owners must have two working keys. It costs a fortune to replace a lost key as it requires replacing the CIM module, as well as changing the locking cylinders. Dealers typically charge between $100 and $200 for this.
There are ways to reduce these high costs. Some parts retailers will search for the code on a spare key (usually the same one that opens the doors and turns off the ignition) and cut a brand new key blade from metal for only a fraction of the dealer's cost. The key must be exactly the same as the original to allow it to function in your vehicle.
You can also replace the case yourself by following these steps. You will need an flathead screwdriver and patience. With the screwdriver, pry away the plastic and take out the emergency key. When the case is opened take the electronics out and put them back in your new case. Make sure you insert the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a cheap part that can be quickly and easily replaced. The YouTube video of Cyclone Cyd demonstrates how you can replace the battery for the remote fob in just four steps. This guide should work with any modern saab key fob, however the procedure might differ slightly.
This button is usually located next to the Saab logo on the back of the fob. This button is usually on the back of the fob, next to the Saab Logo. Then use a flathead screwdriver to insert into the small hole in this button. This will be enough to allow you to open the fob's case so that you can replace the battery.
After the new battery CR1632 is installed You can then reassemble the remote key fob and program it to your car. The whole process should not exceed an hour. It is a simple process that does not require any special tools.
The process is more complex if you lose your key, but it's possible. The dealer needs to first determine the VIN of the vehicle, and then purchase an additional TWICE module and key blade with the correct unique code. Then, they'll have to cut the new key and then program it using a new software tool called MDI.
Replacement Key Fob
The key fob contains a battery that is used to lock and unlock your vehicle. The batteries have a lifespan and will eventually go out of service. This is a typical issue that happens to all cars and the good thing is that you can replace the batteries in a majority of fobs, without replacing the whole case. Amazon sells fobs for replacement that already have all the electronic components in place. You can simply remove the case and replace the batteries. You'll need to remove the emergency key before you replace the batteries. To do this, you need to insert the screwdriver of a small flat head into the slot in the middle. The case will split as you work the screwdriver all around it.
If you're ready to replace your keys, keep a spare on hand. This will save you lots of money. If you do have a spare, you can request that the dealer cut a new key and program it into your car, which is cheaper than replacing the entire key fob.
It is possible to add another key to your car in the event that you don't have one, but it takes an extensive amount of research and effort. The cost of adding a second key is around a hundred dollars and it requires programming of the car's computer. Professionals can do this, but it's an expensive option.
Replacement Ignition
The new SAAB 9-3 features an advanced alarm system that is based on a key code. If you lose only one key, it may be costly to get another one, as the car has to have a specific computer installed and also be programmed to accept a brand new key. Dealers can charge hundreds of dollars to program an additional key even if they're unable to complete the task.
Dealers will charge you the highest price to replace your car's computer (also known as the CIM or SAAB twice) when you lose your only working key. Instead, we can reprogram the EEPROM of your current car computer to make it ready to accept a second key, and save you over 50% of what you'll have to pay at a dealership.
If you've been a long time owner of a 03-11 SAAB 9-3, then you likely are aware that the ignition key isn't really all that durable. They can become extremely sticky, and the buttons can be ripped off from time to time, so you should consider getting a replacement if yours isn't functioning properly. It's not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be done quickly.